Home > Capstan > Anchor & Pot Hauling > C1600 Anchor and Pot Hauler Capstan. Pricing (excluding NZ Taxes) from:-

C1600 Anchor and Pot Hauler Capstan. Pricing (excluding NZ Taxes) from:-

larger imageMove mouse over the image to magnify

For boats to around 14 metre

$2,655.40

Performance | Technical Details

For high speed anchor and pot hauling recovery

For boats to 14 metre / 45 feet
New Zealand made.
All the power you need to make anchoring easy.
Fast recovery of your anchor.
Low drain on your battery.
Auto-brake, holds safely.
Quality European motor.
Fits any deck thickness.
Install or remove in minutes

Performance:

"Steady" pull indicates long run load typical of deep water anchor, or, pot recovery (for example) . The "Snatch" pull is a maximum momentary pull the winch is capable of.

Pull		Rating	Speed		Current	Volts
Kg	Lbs		M/min	Ft/min	Amps	Dc
145	320	Steady	14	46	78	12v
290	635	Short runs	11	36	100	12v
725	1600	Snatch	5	16	-	12v
145	320	Steady	16	52	45	24v
290	635	Short runs	13	42	57	24v
725	1600	Snatch	6	19	-	24v

Back to top

Technical Details:

Motor	1000w x 12v or 24v Motors series wound, European manufacture
Drum	High tensile bronze, chrome plated
Deckplate	Marine grade hard anodised and sealed aluminium
Gearbox	Two stage balanced epicyclic
Deck studs	Supplied with nuts in stainless steel
Weight	16kg (36lbs)
Clearance	Standard deck thickness to 55mm , longer or shorter studs can easily be fitted
Rotation	Clockwise or right hand as viewed from above Reverse rotation to special order.
Brake	Auto action roller clutch - will not run back
Accessories	Footswitch supplied as an option. Covered switch with flip top cover available as an option. Slow reaction circuit breaker supplied as an option.
Winch sizing	There are no absolute rules about winch size to boat size. This product is designed for use on typical private pleasure craft . Winch / boat sizes shown are based on installations that have proved satisfactory for many years.