icon phone  (64) 9 444 5219


V1000, L1000 Replacement Motor and Adaptor Kit

V1000, L1000 Replacement Motor and Adaptor Kit
larger imageMove mouse over the image to magnify
We can supply 12v and 24v modern motors to replace the original long shaft Lucas and Prestolite motors. Remove the top cover from the gearbox and clean out surplus grease. Hold gearbox firmly in a bench vice with soft face jaws. Use an oil filter clamp or a large plumbers pipe wrench and carefully unscrew the old motor assembly (normal LH or anticlockwise to unscrew) from the gearbox. Take care to remove the locking pin if your winch is a reversing (power up/power down) model.  There is a spacer at the outer end of the motor shaft, do not loose this item. After fitting the new motor and adaptor assembly, re drill the locking pin hole (if used) and fit pin.  Three quarters fill the gearbox with Castrol TC 00 grease available from James Nilsson Ltd in 1 litre bottles.
  • Part 436113: Adaptor Kit
  • Part 336035: Motor 12v
  • Part 336034: Motor 24v

You might also be interested in ...

H700 Clutch Handle
Enquire for price
 Secondary Gear V1000/L1000
Enquire for price
Gears for V3000/H3000
Enquire for price
H700M Crank Handle
Enquire for price


anchor winches for sale 
boat anchors for sale
(64) 9 444 5219
0800 4-WINCH




James Nilsson Winches
Auckland Time
Anchor Windlass manufacturers
Monday- Friday
7:30am - 4:30pm (GMT+12)


James Nilsson member of nzmarine