TALK TO US

icon phone  (64) 9 444 5219

 
01464

Chain Stoppers

Chain Stoppers
larger imageMove mouse over the image to magnify
 
Enquire
Installation | Operation | Identification | General 

Installation

  • For boats to 7 metre / 21 feet
  • New Zealand made.
  • All the power you need to make anchoring easy.
  • Fast recovery of your anchor.
  • Low drain on your battery.
  • Auto-brake, holds safely.
  • Quality European motor.
  • Fits any deck thickness.
  • Install or remove in minutes
 
 

Operation:

  1. To load chain, withdraw the small pin with the lanyard attached. Grasp the knurled pin and rotate it until the lock pin slides through the side of the stopper. Next, lift the pawl  and locate its slot by feel while pulling on the knurled pin. When aligned, withdraw the knurled pin and set the pawl carefully aside. Lay the chain along the groove in the stopper and re-assemble.
  2. To lock chain, insert the small pin supplied on the lanyard through the holes in the side of the stopper and the pawl. This holds the pawl in the locked position.
  3. To hold the pawl out of engagement, lift the pawl and insert the smaller pin supplied on the lanyard through the sides of the stopper and under the pawl. This holds the pawl up, out of engagement.

Back to top

 


Identification:

Part
8mm - 5/16"
10mm - 3/8"
13mm - 1/2"
Full Assembly Part No. 700143 Part No. 700144 Part No. 700145
Body Part No. 154774 Part No. 154770 Part No. 154780
Pawl with Lock Pin Part No. 420000 Part No. 420001 Part No. 420002
Knurled Pin Part No. 154776 Part No. 154772 Part No. 154782
Studs Part No. 154000 Part No. 154003 Part No. 154004
Washers Part No. 366046 Part No. 336056 Part No. 336062
Nuts Part No. 339017 Part No. 339021 Part No. 339031
 

Back to top

 


General:

To avoid harsh action and noise while lying to anchor, the use of a nylon spring in front of the stopped is recommended.
Refer to Diagram below
700143 (8mm - 5/16")
700144 (10mm - 3/8")
 
700145 (13mm - 1/2")
  mm inch mm inch mm inch
A 100 4 100 4 130 5/01/2008
B 38 1/01/2002 46 1-13/16 60 2/03/2008
C 10 3-Aug 12 1-Feb 14 Sep-16
D 28 1/01/2008 34 1/03/2008 19 3-Apr
E 55 2/01/2008 75 3 104 4
F M8   M10   M12  
G 148 5/07/2008 156 6/01/2008 104 4
H 53 2 61 2/03/2008 170 6/03/2004
I 72 2/07/2008 77 3 80 3/01/2008
J 74 3 82 3/01/2004 107 4/03/2004
 

Back to top

 
 

You might also be interested in ...

Bow Rollers
Enquire for price

CUSTOMER SERVICE

 
anchor winches for sale
sales@jamesnilsson.co.nz 
boat anchors for sale
(64) 9 444 5219
0800 4-WINCH

NEW ZEALAND

   
 

HOURS

 
James Nilsson Winches
Auckland Time
Anchor Windlass manufacturers
Monday- Friday
7:30am - 4:30pm (GMT+12)
 
 
 

MEMBERS OF


James Nilsson member of nzmarine