Self Holding Hand Winch

positive hold - controlled - safe lowering  
   
Model: SH300

• Loads to 300Kg
• No Free wheel
• Will not run back
• Controlled - safe lowering
• Two optional mounts
• 3 optional cable entries
• Single point lubrication
• Bronze spool and gear
• Stainless steel worm
• LM25 gearbox
• Black anodised finish
• Square drive handle
• Extended handles possible
• Gear ratio 20/1

Gearbox size : 100 x 107 x 135 Installed weight : 3Kg

STORAGE CAPACITY: 3mm = 11metre ... 4mm = 8metre .... 5mm = 4metre

The first 5 turns (about 600mm) should not be wound off and are used to give proper grip on the empty spool.

SH300 winches are used where safe,controlled raising and lowering of a load is required. There is no free wheel mechanism to allow a sudden , dangerous dropping of the load. Used for centreboards, davits, industrial positioning, domestic high storage, commercial vehicles, theatre lighting.

NOT APPROVED FOR LIFTING PEOPLE.

James Nilsson Ltd. 69 Hillside Road, Wairau Valley, Auckland. Tel(09) 444-5219 or 08004-WINCH. Fax(09) 444-5222 Email: sales@jamesnilsson.co.nz Inquiries regarding local or overseas representation are welcome.